- Deep Freezers
- Biological Safety Cabinets
- CO2 Incubators
- PCR (Thermal Cycler)
- Gel Display Systems
- UV Transilluminator
- Electrophoresis and Power Supply
- Microplate Reader (Spectrophotometer)
- NanoDrop (micro volume spectrophotometer)
- Centrifuges
- Automatic Pipettes
- McFarland Densitometre
- Dry Block Heater – Thermoshaker
- Mixers – Shakers – Shakers
- Incubator – Drying Oven
- Water Baths
- Homogenizers
- Precision Balances
- PH Meter ConductivityOxygen Ion Measurement
- Cryopreservation Systems
- Autoclave
Portable PH Meter-Multi-parameter
MW802 PRO are compact microprocessor-based portable meters. These meters allow you to measure pH, EC (conductivity) and TDS with a single instrument and a single probe. These easy and fast calibrating portable meters have a small and ergonomic case design. Other features include a large, easy-to-read LCD and long battery life. The instrument is also manually calibrated in pH, Conductivity and TDS.
- 8 hours of battery life.
- pH/mV/EC/TDS/NaCl/Temp measurement.
Contact Information
You can contact us from the contact information below.
+90 312 473 70 13
info@avakslab.com
İlkbahar, Doğukent Cd. Renaza Plaza No : 739/34, 06550 Çankaya/Ankara
Multi-parameter measurement with a single probe
The Milwaukee MW802 PRO Combo Meter allows you to easily and accurately test pH, conductivity and total dissolved solids (TDS) using a single meter and integrated probe.
With a conductivity range up to 6.00 mS/cm and TDS up to 4000 ppm, the MW802 PRO is ideal for testing in crop production.
pH, conductivity/nutrient EC, TDS (ppm) automatic temperature compensation
Interchangeable, integrated pH, EC and TDS (ppm) probe with a single 3-foot cable for easy operation (SE600 probe included).
A fiber connection on the pH sensor to reduce contamination when measuring fertilizer solutions.
Lightweight and portable form factor of just 5.8 ounces with battery and just over 3 inches wide.
A large easy-to-read display.
Factory calibration with simple, one-point manual calibration for both pH and EC.
pH Range: 0.00 to 14.00 pH
EC Range: 0.00 to 6.00 mS/cm
TDS Range: 0 to 4000 ppm
pH Solubility: 0.1 pH
EC Solubility: 0.01 mS/cm
TDS Resolution: 10 ppm
Temperature Compensation: Automatic between 0 and 50°C
Battery Type / Battery Life: 1 x 9V alkaline / 150 hours use
Automatic shutdown: After 8 minutes of inactivity, the device switches off automatically.
Temperature Compensation: To minimize the effect of temperature changes on pH measurements, the instrument offers automatic temperature compensation (ATC).
Data Storage and Transfer: The instrument has the ability to store and transfer measurement data via USB or other connection options.
- Deep Freezers
- Biological Safety Cabinets
- CO2 Incubators
- PCR (Thermal Cycler)
- Gel Display Systems
- UV Transilluminator
- Electrophoresis and Power Supply
- Microplate Reader (Spectrophotometer)
- NanoDrop (micro volume spectrophotometer)
- Centrifuges
- Automatic Pipettes
- McFarland Densitometre
- Dry Block Heater – Thermoshaker
- Mixers – Shakers – Shakers
- Incubator – Drying Oven
- Water Baths
- Homogenizers
- Precision Balances
- PH Meter ConductivityOxygen Ion Measurement
- Cryopreservation Systems
- Autoclave
Portable PH Meter-Multi-parameter
MW802 PRO are compact microprocessor-based portable meters. These meters allow you to measure pH, EC (conductivity) and TDS with a single instrument and a single probe. These easy and fast calibrating portable meters have a small and ergonomic case design. Other features include a large, easy-to-read LCD and long battery life. The instrument is also manually calibrated in pH, Conductivity and TDS.
- 8 hours of battery life.
- pH/mV/EC/TDS/NaCl/Temp measurement.
Multi-parameter measurement with a single probe
The Milwaukee MW802 PRO Combo Meter allows you to easily and accurately test pH, conductivity and total dissolved solids (TDS) using a single meter and integrated probe.
With a conductivity range up to 6.00 mS/cm and TDS up to 4000 ppm, the MW802 PRO is ideal for testing in crop production.
pH, conductivity/nutrient EC, TDS (ppm) automatic temperature compensation
Interchangeable, integrated pH, EC and TDS (ppm) probe with a single 3-foot cable for easy operation (SE600 probe included).
A fiber connection on the pH sensor to reduce contamination when measuring fertilizer solutions.
Lightweight and portable form factor of just 5.8 ounces with battery and just over 3 inches wide.
A large easy-to-read display.
Factory calibration with simple, one-point manual calibration for both pH and EC.
pH Range: 0.00 to 14.00 pH
EC Range: 0.00 to 6.00 mS/cm
TDS Range: 0 to 4000 ppm
pH Solubility: 0.1 pH
EC Solubility: 0.01 mS/cm
TDS Resolution: 10 ppm
Temperature Compensation: Automatic between 0 and 50°C
Battery Type / Battery Life: 1 x 9V alkaline / 150 hours use
Automatic shutdown: After 8 minutes of inactivity, the device switches off automatically.
Temperature Compensation: To minimize the effect of temperature changes on pH measurements, the instrument offers automatic temperature compensation (ATC).
Data Storage and Transfer: The instrument has the ability to store and transfer measurement data via USB or other connection options.
Contact Information
You can contact us from the contact information below.
+90 312 473 70 13
info@avakslab.com
İlkbahar, Doğukent Cd. Renaza Plaza No : 739/34, 06550 Çankaya/Ankara
Other Devices